技术文章您现在的位置:首页 > 技术文章 > BECKHOFF倍福模块EL2809
BECKHOFF倍福模块EL2809
更新时间:2018-03-27   点击次数:1942次

BECKHOFF倍福模块EL2809原理与接线

The EL2809 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The EL2809 is protected against polarity reversal and processes load currents with outputs protected against overload and short-circuit. The EtherCAT Terminal contains 16 channels, whose signal states are displayed by LEDs. The terminal is particularly suitable for space-saving use in control cabinets. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2809. The power contacts are looped through.

The outputs are fed via the 24 V power contact in the EL2809. The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.

The HD EtherCAT Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block.

Technical dataEL2809
Connection technology1-wire
Number of outputs16
Rated load voltage24 V DC (-15 %/+20 %)
Load typeohmic, inductive, lamp load
Distributed clocks
Max. output current0.5 A (short-circuit-proof) per channel
Short circuit currenttyp. < 2 A
Reverse voltage protectionyes
Breaking energy< 150 mJ/channel
上海勇控自动化设备有限公司

上海勇控自动化设备有限公司

工厂地址:上海市宝山区

©2024 版权所有:上海勇控自动化设备有限公司  备案号:沪ICP备17010722号-2  总访问量:366599  站点地图  技术支持:化工仪器网  管理登陆

Baidu
map